S9S08DZ96F2VLF NXP

S9S08DZ96F2VLF NXP
S9S08DZ96F2VLF NXP
S9S08DZ96F2VLF NXP
S9S08DZ96F2VLF NXP

S9S08DZ96F2VLF NXP

Disponível
S9S08DZ96F2VLF  NXP
 

Unidade de processador central (CPU) HCS08 de 8 bits
• 40-MHz HCS08 CPU (20-MHz bus)
• HC08 instruction set with added BGND instruction
• Support for up to 32 interrupt/reset sources

Memória no chip
• FLASH read/program/erase over full operating voltage and temperature
• EEPROM in-circuit programmable memory; 8-byte single-page or 4-byte dual-page erase sector; Program and Erase while executing FLASH; Erase abort
• Random-access memory (RAM)

Modos de economia de energia
• Two very low power stop modes
• Reduced power wait mode
• Very low power real time interrupt for use in run, wait, and stop

Opções de fonte de relógio
• Oscillator (XOSC) — Loop-control Pierce oscillator; Crystal or ceramic resonator range of 31.25 kHz to 38.4 kHz or 1 MHz to 16 MHz
• Multi-purpose Clock Generator (MCG) — PLL and FLL modes; reference clock with nonvolatile trim (0.2% resolution, 1.5% tolerance over temperature with internal temperature compensation); External reference with oscillator/resonator options

Proteção do sistema
• Watchdog computer operating properly (COP) reset with option to run from backup dedicated 1-kHz internal clock source or bus clock; with optional windowed operation
• Low-voltage detection with reset or interrupt; selectable trip points
• Illegal opcode detection with reset
• Illegal address detection with reset
• FLASH and EEPROM block protect
• Loss-of-lock protection

Suporte ao desenvolvimento
• Single-wire background debug interface
• On-chip, in-circuit emulation (ICE) with real-time bus capture

Entrada/Saída
• Up to 87 general-purpose input/output (I/O) pins and 1 input-only pin
• Up to 32 interrupt pins with selectable polarity on each pin
• Hysteresis and configurable pull device on all input pins.
• Configurable slew rate and drive strength on all output pins.

Opções de pacote
• 100-pin low-profile quad flat-pack(LQFP) — 14x14 mm
• 64-pin low-profile quad flat-pack (LQFP) — 10x10 mm
• 48-pin low-profile quad flat-pack (LQFP) — 7x7 mm

Tips on getting accurate quotes from suppliers. Please include the following in your inquiry:
1. Informações pessoais ou comerciais
2. Forneça a solicitação do produto em grande detalhe
3. Inquérito for MOQ, Unit Price, etc




Please make sure your contact information is correct. Your message will be sent directly to the recipient(s) and will not be publicly displayed. We will never distribute or sell your personal information to third parties without your express permission.