R5F1096CKSP#X0 RENESAS
Disponível
R5F1096CKSP#X0 RENESAS
Minimum instruction execution time can be changed from high speed (0.03125 μs: @ 32 MHz operation with highspeed on-chip oscillator) to ultra low-speed (30.5 μs: @ 32.768 kHz operation with subsystem clock) General-purpose register: 8 bits × 32 registers (8 bits × 8 registers × 4 banks) ROM: 8 to 64 KB, RAM: 0.5 to 4 KB, Data flash memory: 4 KB High-speed on-chip oscillator • Select from 32 MHz (TYP.), 24 MHz (TYP.), 16 MHz (TYP.), 12 MHz (TYP.), 8 MHz (TYP.), 4 MHz (TYP.), and 1 MHz (TYP.) On-chip single-power-supply flash memory (with prohibition of block erase/writing function) Self-programming (with boot swap function/flash shield window function) On-chip debug function On-chip power-on-reset (POR) circuit and voltage detector (LVD) On-chip watchdog timer (operable with the dedicated internal low-speed on-chip oscillator) On-chip multiplier and divider/multiply-accumulator • 16 bits × 16 bits = 32 bits (Unsigned or signed) • 32 bits ÷ 32 bits = 32 bits (Unsigned) • 16 bits × 16 bits + 32 bits = 32 bits (Unsigned or signed) On-chip key interrupt function On-chip clock output/buzzer output controller On-chip BCD adjustment I/O ports: 16 to 44 (N-ch open drain: 0 to 4) Timer • 16-bit timer: 8 channels • Watchdog timer: 1 channel • Real-time clock: 1 channel • Interval timer: 1 channel • Wakeup timer: 1 channel Serial interface • CSI: 0 to 8 channels • UART/UART (LIN-bus supported): 1 to 5 channels • I2 C/Simplified I2 C communication: 0 to 7 channels 8/10-bit resolution A/D converter (VDD = 1.8 to 5.5 V): 4 to 12 channels Power supply voltage: VDD = 1.8 to 5.5 V (J version), VDD = 2.7 to 5.5 V (K version) Operating ambient temperature: TA = −40 to +85°C (J version), TA = −40 to +125°C (K version)
Minimum instruction execution time can be changed from high speed (0.03125 μs: @ 32 MHz operation with highspeed on-chip oscillator) to ultra low-speed (30.5 μs: @ 32.768 kHz operation with subsystem clock) General-purpose register: 8 bits × 32 registers (8 bits × 8 registers × 4 banks) ROM: 8 to 64 KB, RAM: 0.5 to 4 KB, Data flash memory: 4 KB High-speed on-chip oscillator • Select from 32 MHz (TYP.), 24 MHz (TYP.), 16 MHz (TYP.), 12 MHz (TYP.), 8 MHz (TYP.), 4 MHz (TYP.), and 1 MHz (TYP.) On-chip single-power-supply flash memory (with prohibition of block erase/writing function) Self-programming (with boot swap function/flash shield window function) On-chip debug function On-chip power-on-reset (POR) circuit and voltage detector (LVD) On-chip watchdog timer (operable with the dedicated internal low-speed on-chip oscillator) On-chip multiplier and divider/multiply-accumulator • 16 bits × 16 bits = 32 bits (Unsigned or signed) • 32 bits ÷ 32 bits = 32 bits (Unsigned) • 16 bits × 16 bits + 32 bits = 32 bits (Unsigned or signed) On-chip key interrupt function On-chip clock output/buzzer output controller On-chip BCD adjustment I/O ports: 16 to 44 (N-ch open drain: 0 to 4) Timer • 16-bit timer: 8 channels • Watchdog timer: 1 channel • Real-time clock: 1 channel • Interval timer: 1 channel • Wakeup timer: 1 channel Serial interface • CSI: 0 to 8 channels • UART/UART (LIN-bus supported): 1 to 5 channels • I2 C/Simplified I2 C communication: 0 to 7 channels 8/10-bit resolution A/D converter (VDD = 1.8 to 5.5 V): 4 to 12 channels Power supply voltage: VDD = 1.8 to 5.5 V (J version), VDD = 2.7 to 5.5 V (K version) Operating ambient temperature: TA = −40 to +85°C (J version), TA = −40 to +125°C (K version)
Please make sure your contact information is correct. Your message will be sent directly to the recipient(s) and will not be publicly displayed. We will never distribute or sell your personal information to third parties without your express permission.